Let’s take a look at the backstraps for the all-new Taurus GX4. In this brief discussion, we’ll show you the quick and easy removal and installation of your desired backstrap. Let’s get started!
As always check to be sure your firearm is clear and safe both visually and physically checking to be sure the chamber, breach, and magazines are all empty. Keeping in mind the 5 rules of firearm safety, proceed with the steps below.
Step One:
Using a punch, locate and remove the roll pin at the bottom of the backstrap area. A 5/64 punch worked well for us.
Step Two:
Take off the installed backstrap by simply lifting from the bottom and pulling away from the frame.
Step Three:
Identify the 2 sizes and choose what you would like to install. The backstraps are not marked very clearly but with a simple side-by-side comparison, it’s easy to tell the difference in sizes.
Step four:
Install the desired backstrap, insert the roll pin using your 5/64 punch and GO SHOOT!